MIX^® Firmware 2.1

CRMX² Update – March 2024

This is an update to the LumenRadio CRMX chip that is inside our DMG Lighting fixtures. This update will enable Rosco DMG Lighting fixtures to be used within the expanded universes that are available via CRMX². The firmware and instruction buttons below are for the DMG MINI, SL1, and MAXI fixtures only. DMG DASH w/ CRMX fixtures can be updated to CRMX² by updating the fixture’s firmware via the myMIX™ app.
 

Discover the features of MIX 2.1: Available for DMG MINI, DMG SL1 & DMG MAXI ­(not compatible with DMG DASH or MIXBOOK) Improved DMX profiles with better linear response New Global & Gel2 profiles for improved workflow Advanced Art-Net settings for LAN and Wi-Fi New Wi-Fi 5.8GHz option Updated display functionality: 180° screen rotation Brightness control and OFF mode Bluetooth connectivity icon CRMX signal strength icon

Upgrading to MIX 2.1

UPDATE THE LIGHT

There are two ways to update the MIX Firmware to 2.1: via PC or the myMIX^™ app.

Updating via PC (Requires Windows 10 or higher)

Download the Firmware 2.1 Upgrade Utility and the Upgrade Procedure document below.
Follow the instructions in the upgrade procedure to install the driver on your PC and update the fixture’s controller.

Once the driver is installed on your PC, updating each controller only takes a matter of seconds.

Updating the firmware with myMIX
                  
Make sure your myMIX APP is up to date or Download the APP using the links below:

The myMIX app is capable of updating a maximum of 4 lights at the same time.
Updating 1 to 4 lights will take between 20 to 60 minutes.
 

Resources