Facades, Signage, Displays & More
Includes RoscoLED Tape, Custom LitePad, Cube Family, Image Spot & X-Effects LED
Products on this page may not be available in your region.
Please complete this form
Designed for larger Custom LitePad installations, this system comes with power supply and controller all pre-wired and ready to integrate with an array of LitePads.
Power Input: 86 - 244 VAC
Output: 12VDC 25A
Dimming: 0-10VDC, DMX, DALI protocols
Constant voltage power supply for Custom LitePad installations. This power supply is UL recognized and addresses panels up to maximum 60W/5A.
Power Input: 115VAC or 230 VAC
Output: 12VDC 5A
Provides LED dimming via PWM (Pulse Width Modulation) or by 0-10 VDC converters. Two output Channels with maximum 2.5A output per channel; 52.5W total power output.
Input: 12-24VDC, 5.3A max.
Output: 52.5W max./2.5A max. per channel
Provides LED dimming via DALI interface. Two output Channels with maximum 2.5A output per channel; 50W total power output.
Input: 12VDC 5A max.
Output: 50W max./2.5A max. per channel
Products on this page may not be available in your region.
Please complete this form
The different Image Spot Lens Optics provide a range of long to short projection capabilities with varying image diameters. Each Image Spot Lens Optic is designed to receive the optional Image Spot Lens Cover that prohibits water & debris from entering the front of the optic. This easy-to-access filter chamber is also useful for installing one of the diffusion filters found in the optional OPTI-FLECS Filter Pack.
Specifications:
Available colors: Black, Silver
Available beam angles: 10°, 19°, 25°, 30°
The Very Narrow - 10° Lens enables the longest projection capability.
Image Diameter = 3.8’ (1.15m) @ 20’ (6m) distance.
The Narrow - 19° Lens enables long projection capability with broader image.
Image Diameter = 6.6’ (2m) @ 20’ (6m) distance.
The Medium - 25° Lens supports mid-range projections.
Image Diameter = 7.9’ (2.4m) @ 20’ (6m) distance.
The Wide - 30° Lens produces the widest beam spread, making it the best for short throws.
Image Diameter = 8.2’ (2.5m) @ 20’ (6m) distance.
Product Numbers:
3’ (1m) safety cable with convenient threaded connector designed to wrap around the fixture’s mounting point to provide security for any Image Spot installation.
RJ45 to 5-Pin XLR Adaptor
5-Pin XLR to RJ45 Adaptor
The Rosco Pole Mount is a rugged mounting accessory for attaching Rosco Projectors and Rosco Cube products to interior or exterior round poles.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Pole Mounts attach to any round structure via Stainless Steel Straps (kit sold separately).
Product Numbers:
The Rosco Wall Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior vertical surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
Products on this page may not be available in your region.
Please complete this form
The different Image Spot Lens Optics provide a range of long to short projection capabilities with varying image diameters. Each Image Spot Lens Optic is designed to receive the optional Image Spot Lens Cover that prohibits water & debris from entering the front of the optic. This easy-to-access filter chamber is also useful for installing one of the diffusion filters found in the optional OPTI-FLECS Filter Pack.
Specifications:
Available colors: Black, Silver
Available beam angles: 10°, 19°, 25°, 30°
The Very Narrow - 10° Lens enables the longest projection capability.
Image Diameter = 3.8’ (1.15m) @ 20’ (6m) distance.
The Narrow - 19° Lens enables long projection capability with broader image.
Image Diameter = 6.6’ (2m) @ 20’ (6m) distance.
The Medium - 25° Lens supports mid-range projections.
Image Diameter = 7.9’ (2.4m) @ 20’ (6m) distance.
The Wide - 30° Lens produces the widest beam spread, making it the best for short throws.
Image Diameter = 8.2’ (2.5m) @ 20’ (6m) distance.
Product Numbers:
Contains three, 43mm OPTI-FLECS diffusion filters designed for the Image Spot to create varying levels of beam control for spot lighting applications. The kit also includes a retaining ring for quick & easy installation of the filter inside the Image Spot Lens Optic.
The OPTI-FLECS Filter Pack includes:
• Retaining Ring
• Soft Diffusion (R132) – 43mm dia.
• Smoothing Frost (R9101) – 43mm dia.
• Double Powder Frost (R3000) – 43mm dia.
3’ (1m) safety cable with convenient threaded connector designed to wrap around the fixture’s mounting point to provide security for any Image Spot installation.
The Rosco Pole Mount is a rugged mounting accessory for attaching Rosco Projectors and Rosco Cube products to interior or exterior round poles.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Pole Mounts attach to any round structure via Stainless Steel Straps (kit sold separately).
Product Numbers:
The Rosco Wall Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior vertical surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
The Rosco Surface Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior horizontal surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
Products on this page may not be available in your region.
RoscoLED® Power, Dimming & Control Accessories
RoscoLED® Tape Mounting and Beam Control Accessories
Please complete this form
Specifications:
Input Voltage: 90VAC ~ 264VAC via Neutrik Powercon connector
Output Voltage: 24VDC via three, 3-pin connectors
Rated Power: 400W
DMX: 5-Pin XLR In – RJ45 In/Out
Operating Temp: 32° to 122° F (0° to 50° C)
IP Rating: IP20
Dimensions: 13” L x 9.2”W x 3.5” H (332mm x 234mm x 89mm)
Weight: 9.5 lb (4.3 kg)
Certifications: ETL/cETL (UL8750, CSA 22.2 #250)
Product Number:
Specifications:
Input Voltage: 12 ~ 24VDC
Output Power: 108W(12V) / 216W(24V)
Output Channels: 2
Operating Frequency: 433.92 MHz
Working Distance: 164-ft (50m)
IP Rating: IP20
Operating Temp: -4° to 131° F (-20° to 55° C)
Dimensions: 5.3” x 1.2” x 0.8” (135mm x 30mm x 20mm)
Product Number:
A 3-pin connector extension cable that connects RoscoLED VariWhite Tape to a RoscoLED VariWhite Control Box.
Black with waterproof fittings
Product Numbers:
A cable splitter that allows two lengths of RoscoLED VariWhite Tape to plug into one 3-pin outlet on a RoscoLED VariWhite Control Box.
3-Pin Connectors
Black with waterproof fittings
Product Number:
A 3-pin, male connector with 20cm, unterminated pigtail leads that can be soldered onto cut pieces of RoscoLED Tape – VariWhite. This connector is useful for attaching cut pieces of RoscoLED Tape – VariWhite to a RoscoLED VariWhite Control Box, or for connecting multiple cuts of RoscoLED Tape – VariWhite together using the RoscoLED VariWhite Cables.
Product Number:
A 3-pin, female connector with 20cm, unterminated leads that can be plugged into the 3-pin male connector on reels of RoscoLED Tape – VariWhite. The connector allows RoscoLED Tape – VariWhite to be direct-wired to RoscoLED Power Supplies. This connector is also useful for connecting multiple cuts of RoscoLED Tape – VariWhite together.
Note: Every reel of RoscoLED Tape – VariWhite ships with one of these connectors.
Product Number:
Provide LED dimming of larger or networked systems via 0-10 VDC converters, DMX protocols or DALI interface. Four output channels enable static or dynamic lighting control; 6A output per channel; 720W total power output.
Input: 12VDC 24A max.
Output: 4 outputs/6A max. per channel
Specifications:
Input Voltage: 12 ~ 24VDC
Output Current: 12 x 5A
Output Power: 12 x (60-120W)
DMX In/Out: 5-Pin XLR, RJ45, Wire Terminals
RDM Addressable
PWM Adjustment: 500Hz – 30kHz
IP Rating: IP20
Operating Temp: -4° to 122° F (-20° to 50° C)
Dimensions: 6.54” x 3.93” x 1.5” (166 mm x 100 mm x 38 mm)
Product Number:
Specifications:
Input Voltage: 12 ~ 24VDC
Output Current: 5 x 8A
Output Power: 5 x (96—192)W
DMX In/Out: 5-Pin XLR, RJ45, Wire Terminals
RDM Addressable
PWM Adjustment: 500Hz – 30kHz
IP Rating: IP20
Operating Temp: -4° to 122° F (-20° to 50° C)
Dimensions: 6.5” x 2.9” x 1.5” (164mm x 73mm x 38mm)
Product Number:
Specifications:
Input Voltage: 90VAC ~ 264VAC
Output Voltage: 24VDC
Rated Current: 5A
Rated Power: 120W
IP Rating: IP20
Operating Temp: -22° to 140° F (-30° to 60° C)
Dimensions: 5.0” x 2.5” x 1.3” (127mm x 64mm x 33mm)
Product Number:
Specifications:
Input Voltage: 90VAC ~ 305VAC
Output Voltage: 24VDC
Rated Current: 6.3A
Rated Power: 150W
IP Rating: IP67
Operating Temp: -40° to 158° F (-40° to 70° C)
Dimensions: 9.0” x 2.7” x 1.5” (228mm x 68mm x 39mm)
Product Number:
Specifications:
Input Voltage: 90VAC ~ 305VAC
Output Voltage: 24VDC
Rated Current: 13.34A
Rated Power: 320W
IP Rating: IP67
Operating Temp: -40° to 158° F (-40° to 70° C)
Efficiency: Typ. 94%
Dimensions: 9.9” x 3.5” x 1.7” (252mm x 90mm x 44mm)
Product Number:
Specifications:
Input Voltage: 90VAC ~ 305VAC
Output Voltage: 24VDC
Rated Current: 13.34A
Rated Power: 600W
IP Rating: IP67
Operating Temp: -40° to 158° F (-40° to 70° C)
Efficiency: Typ. 94%
Dimensions: 11” x 5.7” x 1.9” (280mm x 144mm x 49mm)
Product Number:
Specifications:
Input Voltage: 90VAC ~ 264VAC
Output Voltage: 24VDC
Rated Current: 13A
Rated Power: 312W
IP Rating: IP20
Operating Temp: -4° to 149° F (-20° to 65° C)
Efficiency: Typ. 87%
Dimensions: 8.5” x 4.5” x 0.9” (215mm x 115mm x 50mm)
Product Number:
Specifications:
Input Voltage: 90VAC ~ 264VAC
Output Voltage: 24VDC
Rated Current: 14.6A
Rated Power: 350W
IP Rating: IP20
Operating Temp: -4° to 149° F (-20° to 65° C)
Efficiency: Typ. 87%
Dimensions: 8.6” x 4.5” x 2.0” (219mm x 115mm x 50mm)
Product Number:
Product Features:
Product Number:
Product Features:
Product Number:
Product Features:
Product Numbers:
Product Features:
Product Number:
Product Features:
Product Numbers:
Product Features:
Product Numbers:
Product Features:
Product Numbers:
Product Features:
Product Numbers:
Product Features:
Product Numbers:
Products on this page may not be available in your region.
Please complete this form
Specifications:
Machined aluminum alloy lens holder
Precision optics
Available beam angles: 19°, 30°, 50°, 70°
Available colors: Black, Silver
For outdoor installations where the lens is mounted facing upwards, we recommend purchasing the X-Effects LED Lens Cover #297000000020. This accessory helps prevent pooling of water in the lens, which can lead to projection distortion and accelerate lens wear.
Product Numbers:
The X-Effects LED Lens Cover accessory helps prevent pooling of water in the lens for outdoor installations where an X-Effects LED lens is mounted facing upwards.
Download the X-Effects® LED Lens Cover Installation Instructions:
Download the X-Effects® LED Lens Cover Installation Instructions
Product Numbers:
Pair of protective caps to prevent water ingress and damage to the connectors of the X-Effects fixture and cable. The caps are threaded to easily screw on and off for protection when the cable is detached from the fixture.
Download the Installation Guide
Product Numbers:
This X-Effects LED Framing Shutters provide control of the fixture’s beam-size and shape. The four-leaf shutter accessory can be installed in a variety of ways along the magnetic ring around the static gobo position, allowing the fixture’s beam to be cut from the top, bottom and/or both sides.
Specifications:
Number of Leaves: Four (top/bottom/left/right)
Product Numbers:
Rosco’s 4-Pattern Gobo Wheel gobos can create unique lighting effects when inserted into an X-Effects LED Projector. Four gobo patterns are combined onto a single Dynamic-sized Black & White glass gobo to provide four different designs to rotate through, without having to remove or replace any gobos.
The 4-Pattern Gobo Wheel gobos are sized and configured specifically for the second Gobo Rotation Carrier further from the LED. This Dynamic gobo slot provides the sharpest focus for the patterns. Simply line up the desired pattern into the optical path and stop the gobo rotation to have the preferred gobo displayed.
Replacement Effects Glass Gobo for the X-Effects LED Projector.
Note – the fixture ships with two of these gobos. This single-gobo accessory is available to replace gobos that may break or become lost during use.
Product Numbers:
Rosco’s textured-dichroic ColorWaves gobos can create unique, color-blended lighting effects when inserted into an X-Effects LED Projector. These gobos are available in two sizes to fit into the Static Color/Gobo Slot or the larger (96mm) gobos to fit into the fixture’s two rotating Dynamic Effects Glass positions.
Product Number:
XXXXXX = five digit gobo number
Visit the ColorWaves page to see all of the available options: www.rosco.com/colorwaves
Rosco’s clear, textured Image Glass gobos can create unique lighting effects when inserted into an X-Effects LED Projector. These gobos are available in two sizes to fit into the Static Color/Gobo Slot or the larger (96mm) gobos to fit into the fixture’s two rotating Dynamic Effects Glass positions.
Product Number:
XXXXXX = five digit gobo number
Visit the Image Glass page to see all of the available options: www.rosco.com/imageglass
A specialized, cyan-colored, dichroic glass filter that features wavy etches to allow a portion of the X-Effects LED Projector’s natural light through – helping to create a more-nuanced, realistic water effect.
Product Number:
A specialized, amber-colored, dichroic glass filter that features wavy etches to allow a portion of the X-Effects LED Projector’s natural light through – helping to create a more-nuanced, realistic fire effect.
Product Number:
A specialized, light green-colored, dichroic glass filter that features wavy etches to allow a portion of the X-Effects LED Projector’s natural light through – helping to create a more-nuanced, realistic Aurora Borealis/Northern Lights effect.
Product Number:
The Rosco Pole Mount is a rugged mounting accessory for attaching Rosco Projectors and Rosco Cube products to interior or exterior round poles.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Pole Mounts attach to any round structure via Stainless Steel Straps (kit sold separately).
Product Numbers:
The Rosco Wall Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior vertical surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
The Rosco Surface Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior horizontal surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
3’ (1m) safety cable with convenient threaded connector designed to wrap around the fixture’s mounting point to provide security for any Image Spot installation.
Products on this page may not be available in your region.
Please complete this form
Specifications:
Machined aluminum alloy lens holder
Precision optics
Available beam angles: 19°, 30°, 50°, 70°
Available colors: Black, Silver
For outdoor installations where the lens is mounted facing upwards, we recommend purchasing the X-Effects LED Lens Cover #297000000020. This accessory helps prevent pooling of water in the lens, which can lead to projection distortion and accelerate lens wear.
Product Numbers:
The X-Effects LED Lens Cover accessory helps prevent pooling of water in the lens for outdoor installations where an X-Effects LED lens is mounted facing upwards.
Download the X-Effects® LED Lens Cover Installation Instructions:
Download the X-Effects® LED Lens Cover Installation Instructions
Product Numbers:
Pair of protective caps to prevent water ingress and damage to the connectors of the X-Effects fixture and cable. The caps are threaded to easily screw on and off for protection when the cable is detached from the fixture.
Download the Installation Guide
Product Numbers:
This X-Effects LED Framing Shutters provide control of the fixture’s beam-size and shape. The four-leaf shutter accessory can be installed in a variety of ways along the magnetic ring around the static gobo position, allowing the fixture’s beam to be cut from the top, bottom and/or both sides.
Specifications:
Number of Leaves: Four (top/bottom/left/right)
Product Numbers:
Rosco’s 4-Pattern Gobo Wheel gobos can create unique lighting effects when inserted into an X-Effects LED Projector. Four gobo patterns are combined onto a single Dynamic-sized Black & White glass gobo to provide four different designs to rotate through, without having to remove or replace any gobos.
The 4-Pattern Gobo Wheel gobos are sized and configured specifically for the second Gobo Rotation Carrier further from the LED. This Dynamic gobo slot provides the sharpest focus for the patterns. Simply line up the desired pattern into the optical path and stop the gobo rotation to have the preferred gobo displayed.
Replacement Effects Glass Gobo for the X-Effects LED Projector.
Note – the fixture ships with two of these gobos. This single-gobo accessory is available to replace gobos that may break or become lost during use.
Product Numbers:
Rosco’s textured-dichroic ColorWaves gobos can create unique, color-blended lighting effects when inserted into an X-Effects LED Projector. These gobos are available in two sizes to fit into the Static Color/Gobo Slot or the larger (96mm) gobos to fit into the fixture’s two rotating Dynamic Effects Glass positions.
Product Number:
XXXXXX = five digit gobo number
Visit the ColorWaves page to see all of the available options: www.rosco.com/colorwaves
Rosco’s clear, textured Image Glass gobos can create unique lighting effects when inserted into an X-Effects LED Projector. These gobos are available in two sizes to fit into the Static Color/Gobo Slot or the larger (96mm) gobos to fit into the fixture’s two rotating Dynamic Effects Glass positions.
Product Number:
XXXXXX = five digit gobo number
Visit the Image Glass page to see all of the available options: www.rosco.com/imageglass
A specialized, cyan-colored, dichroic glass filter that features wavy etches to allow a portion of the X-Effects LED Projector’s natural light through – helping to create a more-nuanced, realistic water effect.
Product Number:
A specialized, amber-colored, dichroic glass filter that features wavy etches to allow a portion of the X-Effects LED Projector’s natural light through – helping to create a more-nuanced, realistic fire effect.
Product Number:
A specialized, light green-colored, dichroic glass filter that features wavy etches to allow a portion of the X-Effects LED Projector’s natural light through – helping to create a more-nuanced, realistic Aurora Borealis/Northern Lights effect.
Product Number:
The Rosco Pole Mount is a rugged mounting accessory for attaching Rosco Projectors and Rosco Cube products to interior or exterior round poles.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Pole Mounts attach to any round structure via Stainless Steel Straps (kit sold separately).
Product Numbers:
The Rosco Wall Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior vertical surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
The Rosco Surface Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior horizontal surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
3’ (1m) safety cable with convenient threaded connector designed to wrap around the fixture’s mounting point to provide security for any Image Spot installation.
Products on this page may not be available in your region.
Products on this page may not be available in your region.
Products on this page may not be available in your region.
Products on this page may not be available in your region.
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs
